Skip to main content
In some situations, the overlay may become bugged and flicker on and off the screen rapidly. This usually occurs due to conflicting background applications or specific multi-monitor configurations.

​
Initial Check

Are you playing DayZ?If you are a DayZ customer, some amount of flickering is normal behavior. You likely cannot stop the flickering completely, but you can significantly reduce it. Please skip to the DayZ Optimization section below..

​
General Solutions

If you are experiencing rapid flickering, please attempt the following solutions in order.

​
1. Disable Conflicting Software

Background applications, specifically those that use GPU acceleration or overlays, often conflict with the loader.
  1. Open Task Manager.
  2. Navigate to the Startup tab.
  3. Disable unnecessary startup applications (especially GPU software like MSI Afterburner, GeForce Experience overlay, etc.).
  4. Restart your PC and try again.

​
2. Multi-Monitor Configuration

If you use two or more displays, mismatched settings often cause rendering issues.
Ensure all connected monitors are set to the same refresh rate (Hz) and same resolution. Windows struggles to render the overlay across screens with vastly different refresh timings.
If syncing settings doesn’t work:
  1. Unplug all secondary displays.
  2. Keep only your main gaming monitor connected.
  3. Restart your PC and inject.
HWID Note: Unplugging monitors may alter your hardware ID configuration. If the loader asks for a reset, this is normal.

​
The Game Bar Method

If the general solutions above do not work, this Windows Game Bar workaround resolves the issue 99% of the time.
1

Activate Game Bar

Press WIN + G on your keyboard to open the Windows Game Bar overlay.
2

Pin a Widget

Find a widget (we recommend the Performance widget as it is small). Click the Pin Icon in the upper right corner of that widget to keep it on screen.
3

Close Game Bar

Press WIN + G again to close the main overlay. The pinned widget should remain visible.
4

Inject

Inject the software normally and launch your game.
5

Re-Pin (If needed)

When the cheat overlay pops up and starts flashing:
  1. Press WIN + G one more time.
  2. Ensure the widget is still pinned (you may need to move or unpin/repin it).
  3. Close Game Bar.
As long as the Windows widget remains pinned while you are injected, the flashing should stop.

​
DayZ Specific Optimization

For DayZ users, while you cannot eliminate flickering entirely, you can make it manageable using the following settings:
  1. Cap In-Game FPS: Set your in-game framerate to match your monitor’s refresh rate exactly.
  2. Use Throttle: Navigate to the MISC section of the cheat menu and enable the Throttle function.

​
Still having issues?

If you have read this guide thoroughly and attempted all options (including the Game Bar method) but are still experiencing issues:

Contact Support

Please create a ticket in our Discord community. Mention that you have already attempted the “Game Bar Method” so we can assist you faster.